J+J’s New J4C Actuator – Inside The Box
AVS have been lucky enough to get an early look at J+J’s newest actuator and wanted to share with you some of the features of the new range.
Prices are available when logged inNot logged in? Click here (it's easy, and quick!)
Usually ships from stock
Electric ball valve used to isolate flow in pipe systems.
Media can flow in either direction (bi-directional).
J+J Electric Actuator Features :
Automatically accepts any voltage 24V to 240V AC/DC
Milti-colour LED status light
IP67 weatherproof, CE marked
Electronic torque limiter
Selectable manual override
Local and remote position indication
Ball Valve Features:
Full bore ball valve designed for actuation
Body: NP Brass Ball: Plated brass Seats: PTFE
End connections: Screwed BSP female
WRAS approved for use with drinking water
Power open, power close.
3 Wire SPDT relay or switch required.
Live switches to open and close the actuator.
Stays put on loss of external power
Max pressure 40bar
Temp range: -20 to 70C
Call if higher temp needed.
NOT for use on steam.
These WRAS approved electric actuated full bore brass ball valves use the J3Cs J+J electric actuator to provide on-off isolation in drinking water applications. Stays put if power fails. Supplied fully assembled and tested. You can buy electric actuated ball valves online at AVS.