AVA Basic On/Off Electric Actuator On A Genebre 2525 Flanged PN16 Iron Ball Valve

SKU: EAB480-G

Overview

Full bore 2 piece construction, flanged PN16, providing full unrestricted flow and a very low-pressure drop across the valve. Designed for automation with integrally cast ISO5211 actuator mounting platform. Turning the ball through 90° fully opens the valve, turning back through 90° fully closes the valve and isolates the flow. End connections are flanged PN16.

These ball valves are ideal for general service applications.

Description

Water, oil, air and most non-corrosive media, subject to compatibility with wetted parts in contact with media. Not recommended for use on steam. Do not use on potable water.
Electrical actuators sized on a maximum differential pressure of 10 bar wet service, operated at least once per day.

The maximum working temperature of a directly mounted assembly is +70C. For higher working temperatures, consider models that have a mounting kit or TSM stem extension between the valve and actuator which uses air cooling to dissipate the rising heat from the valve away from the actuator.

Configure your product below

Clear