Ductile Iron Swing Check Valve with Flanged PN10/16 Ends

SKU: V7300V

Usually ships from stock

Overview

A high quality flanges swing check valve in ductile iron for general water supply, Fire fighting, HVAC and sewage installations.

Sizing

Max Working Pressure: 16 Bar
Operating Temp: -5°C +80°C

Description

  • Range from ND50 up to ND400
  • The rubber disc is totally encapsulated for superior sealing and corrosion resistance
  • Installation in horizontal or vertical position
  • Low load loss.
  • Low noise.
  • 100% sealing
  • Epoxy paint 250 microns RAL 5017

Configure your product below

Clear

Technical Specs

Construction

Body: D.Iron GJS500
Plug: S.Steel 304
MiniPad: PTFE
Disc: D.I. GJS500+EPDM
Gasket: EPDM
Bonnet: D.Iron GJS500
Bolt: NBR
Washer: Carbon Steel

Standards

Design : BS5153, EN 1074-3.
Face to Face : EN 558-1 Series 48
Mounting with flanges: PN10 / PN16 EN 1092-2.
Pressure Test : EN 12266-1, DIN 3230, BS6755 y ISO 5208: Body : 24 bar. Seat : 17.6 bar.

Manufacture acc. to the requirements of the EU directive 2014/68/EU Equipements under pressure: Cat. III mod. H.