Low cost pneumatic actuator ‘C’ Type in anodised aluminium

SKU: CHCD

Overview

Pneumatic valve actuator, quarter turn
Brand: CH-air C Type
Rack and pinion design
Blow-out proof pinion
Housing: Extruded aluminium, hard anodised
Ends: Cast aluminium
Pinion: ENP steel
Pistons: Cast aluminium
Seals: NBR

Function

Driven by dry, filtered compressed air
Min/ max air pressure: 2bar/ 8bar
Min/ max working temperature: -20C to +80C
Air to open, air to close or spring to close (spring return)

Sizing

Torque output dependant upon air supply pressure or quantity of springs.
Allow a safety factor when sizing.
Valve torque increases when idle for long periods.
Valve torque increases in dry duty applications.

Description

CH-air pneumatic actuator with hard anodised aluminium housing, rack and pinion design, manufactured in China. Low cost ‘C’ Type. Driven by compressed air with air to open, air to close, double acting function or spring to close, single acting functio. Conforms to ISO5211 for mounting of valves, and Namur plus VDI-VDE3845 for mounting of solenoid valves, limit switch boxes and positioners. CE marked. ATEX Zone I & II certified. Buy CH-air actuators and actuated valves online at AVS.

Configure your product below

Clear

Technical Specs

Overview

TypeRack and pinion
Body MaterialHard anodised aluminium
End CapsDie cast aluminium
PistonsDie cast aluminium
PinionNickel plated steel
Spring TypePre-compressed cartridge type
Spring materialEpoxy coated spring steel
SealsNBR Nitrile Rubber
Sliding PartsNylon 46
FastenersAISI 304 Stainless Steel