Mars 2 Piece Stainless steel ball valves with AVA Basic electric actuator

SKU: EAB2200

Usually ships from stock


2 Way electric ball valve used to isolate flow in pipe systems.
Media can flow in either direction (bi-directional).
AVA Basic On-Off Electric Actuator Features :
Voltages available – 24VDC, 24VAC, 110VAC, 240VAC
Model 20 supplied with pre-wired cable
IP67 weatherproof, CE marked
Motor overload protection
Emergency manual override
Local and remote position indication
22 Series Ball Valve Features:
Full bore ball valve designed for actuation
Body: CF8M 316 SS Ball: CF8M Seats: RPTFE
End connections: Screwed BSP female


Power open, power close.
3 Wire SPDT relay or switch required.
Live switches to open and close the actuator.
Stays put on loss of external power


Max pressure 63bar
Assembly Temp range: -20 to +70C
Call if higher temp needed.


These Mars 2 Piece electric actuated full bore stainless ball valves use the AVA Basic electric actuator to provide on-off isolation in general service applications. Stays put if power fails. Supplied fully assembled and tested. You can buy AVA electric actuated stainless steel ball valves online at AVS.

Configure your product below