PN10/16 Flanged Type Stainless Steel Butterfly Valve

SKU: G6600V-EPDM

Usually ships from stock

Overview

A high quality lugged butterfly valve in stainless steel

Sizing

Maximum Working Pressure : 16 bar.
Maximum Working Temperature : -10 °C / +120 °C.
Peak Temperature : -15 °C / 130 °C.

Description

  • Concentric Disc Valves
  • Range from ND50 up to ND1200
  • Suitable for bidirectional use
  • One-piece shaft. Avoid breakage due to water hammer
  • Vulcanized seat
  • Does not need joints for installation
  • Low load loss
  • High Quality ISO 5211 Flange
  • Epoxy paint 250 microns RAL5017

Configure your product below

Clear

Technical Specs

Construction

O-Ring: NBR
Stem: S.S. 420
Disc: Stainless Steel 316
Seat: EPDM
Body: D.Iron GJS400
Screws: S.S. A2
Bushing: Lubricated Bronze
Nut & Bolt: S.S. A2

Standards

Design : EN 1074-2
Distance between faces: EN 558-1 Serie 20, ISO 5272 Serie 20, DIN 3202.
Mounting between flanges : PN10 / PN16 EN 1092-2.
Pressure Test : EN 12266-1, DIN 3230, BS6755 and ISO 5208 (Body : 24.0 bar, Seat : 17.6 bar)
Manufacture acc. to the requirements of the EU directive 2014/68/EU Equipements under pressure: mod. H