Unidirectional Wafer Type Stainless Steel Knife Gate Valve For PN10 Flanges

G9100V Stainless Steel Knife Valve

SKU: G9100V

Usually ships from stock

Overview

A high quality knife gate valve in stainless steel for pulp production, water, water treatment, waste water, chemical industry ( inc. powdery or crystallizing products), wine-producing, pulverized products (inc. cement work, pneumatic transport, stocking).

Sizing

Maximum Working Pressure : DN50-250: 10 bar, DN300-450: 7 bar, DN500-600: 4 bar
Operating Temp: -10°C +130°C

Description

  • Range from ND50 up to ND600.
  • Function ON/OFF or regulation.
  • Wafer threaded mounting ISO PN10
  • Unidirectional tightness.
  • Small head loss.
  • Gland assembly: packing and O-ring (same mat. as seat joint) to assure the elasticity and decrease the operating torque.
  • Possibility to regulate thick fluids with the adaptation of a diaphragm ring.

Configure your product below

Clear
Add to quote

Related products

  • V1900V Two pieces Ball Valves, Full Bore, Flanges PN16, from DN15 to DN200.

    2pc PN-16 Cast Iron, Flanged ATEX Ball Valve

    View
  • PN16 Wafer Type Butterfly Valve

    PN16 Wafer Type Stainless Steel Butterfly Valve for PN-10/16 Flanges – Class 150

    View
  • WRAS Approved Electric On-Off Iron Butterfly Valves with AVA Electric Actuator

    WRAS Approved Electric On-Off Iron Butterfly Valves with AVA Electric Actuator

    View

Technical Specs

Construction

Body: Stainless Steel 316
Packing: PTFE
Gate: S.Steel 316
Stem: S.Steel 13% Cr
Support plate: Steel + Epoxy
Nut support: Zinc Steel
Friction washer: Bronze
Nut: Bronze
Stop Screw: S.Steel A2
Greaser: S.Steel A2
Cap: Plastic
Protection tube: Steel
Handwheel: C.Iron EN-GJL-250
Packing Gland: Aluminum / Steel
Gasket: EPDM or Metal
Support ring: S.Steel 316
O-Ring: NBR