J+J J4C-B140 12V On/Off 170Nm (1504.50 in-lbs) Electric Actuator

SKU: J4C-B140

Overview

J+J’s J4C is a completely multi-voltage compact electrical actuator range for the control and regulation of valves. The J4C-S utilises a new brushless-motor drive design with a maximum break torque of 170Nm. The actuator offers IP67 protection and comes with with a manual override, a heater, an electric torque limiter, a high visibility LED status light, external Din plug connectivity and an industry standard visual dome indicator.

Description

Ships as standard with:
– Bluetooth connectivity
– Modbus control
– Manual override handwheel
– 2 additional volt-free end of travel confirmation switches.
– Electronic torque limiter.
– Automatic anti-condensation heater.
– Multi-coloured status light.
– Dome visual position indicator.
– Configurable operation via adjustable cam system (max. 340°)
– Standard 2 pin control or optionally 3 pin regulated operation control.

 

Voltage Range: 12V DC/AC (50/60 Hz)
Current Draw: 0.21 A – 1.98 A

Operating time without load: 25s ± 10%
Maximum break torque: 170Nm (1504.5 lb/in)
Max. operating torque: 140Nm (1239 lb/in)
Duty Rating: 75%
Max. working angle: 0°-270°
Limit Switch: 4 SPST NO micro (2 stop, 2 confirm)
Anti-condensation heater: 3.5W
Larger DIN plug: EN175301-803 FORM A
Smaller DIN plugs: DIN43650/C
Protection: IP67
Operating temperature range: -20°C – 70°C (-4°F – 158°F)

ISO 5211 mounting plate: F07 – F10 (optionally: *F12)
Female output drive: *22mm (optionally: *17mm)

Weight: 5.2Kg

Housing Material: Polyamide (PA6)

 

 

Unloaded Max. operating torque Max. break torque
Voltage A W A W A W
12VDC 1.93 23.1 4.73 56.76 5.39 64.68
24VDC 0.66 15.84 2.15 51.48 2.53 60.72
48VDC 0.30 14.25 0.88 42.24 1.10 52.80
110VDC 10.89 0.28 30.25 0.39 42.35
12VAC 33.00 6.60 79.20 8.47 101.64
24VAC 0.83 19.8 2.59 62.04 3.30 79.20
48VAC 0.48 23.23 1.43 68.64 1.79 86.06
110VAC 0.23 25.41 0.63 68.97 0.72 78.65
240VAC 0.18 42.24 0.39 92.4 0.44 105.60

Configure your product below

Clear